CellarTech South West Ltd
Basement & Cellar Conversion
Basements & Cellars Supplied & Built
Serving Gloucestershire & the South West


 

 

John Newton Products used by CellarTech South West




Newton 601 Slimline (M6)
600 System - Flooring Membranes



Flat Loose Laid High Grade Flooring Membrane


Newton 601 Slimline is a high-grade flooring membrane used primarily for isolating moisture sensitive flooring from dampness in the floor slab, but can also be used as the floor membrane as part of Newton System 500 when the survey has ascertained that no risk of water entering through the body of the slab exists. Newton 601 Slimline allows for the installation of sensitive flooring to be laid above green still curing concrete as soon as the concrete is walk-able, usually two days, significantly reducing project times.
With a loading capability of over 1000kN/m2, Newton 501 Slimline able to resists very high compressive loading and is suitable for use as a high load DPC within structural block walls, especially when used to connect the wall and floor membranes within Newton System 500.
Newton 601 is available in rolls 2.07m x 20m 40m2 (M6)





Newton 603 (M5)
600 System - Flooring Membranes



3mm Loose Laid Flooring Membrane


Newton 603 is a high quality flooring membrane suitable for use above new and existing floors. The 3mm studs allow for pressure equalisation of dampness within the floor below allowing for dissipation at room perimeter and subsequent drying of the floor. The studs also give slight compression to footfall making the floor very responsive and comfortable and ideal as the floor membrane for performance sports floors.

Newton 603 uncouples the floor finish from the substrate so that movement is not transferred to the floor finish above. The membrane also bridges small cracks allowing for quick floor installation above less than ideal substrate.

Newton 603 is guaranteed against deterioration for 30 years, and has a life expectancy of at least 50 years (DIN 9001:2000). Newton 603 is inert with high compressive loading stability. It is highly resistant to water, alkalies, saline solutions and organic acids, and it is not effected by minerals. It is also resistant to bacteria, fungi and other small organisms.

Newton 603 is suitable for non-bonded flooring finishes such as laminate flooring, timber flooring and particle and ply floor boards. Where the floor finish requires a bond to the membrane, for example, paving slabs, use Newton 603 Mesh.

Newton 603 is available in rolls 2m x 20m 40m2 (M23)





Newton 603 Mesh (M24 & M25)
600 System - Flooring Membranes



Loose Laid 3mm Flooring Membrane with Meshed Surface


Newton 603 Mesh is high grade flooring membrane with an installation height of 3.0mm. The white HDPE cuspated core has a polyethylene mesh above allowing for adhesion of the floor finish to the membrane.

Newton 603 Mesh is loose laid above the substrate and is therefore uncoupled from the floor ensuring that the floor finish is not affected by movement or cracking of the substrate.

Newton 603 Mesh is available in rolls 1m x 20m 20m2 (M24) and 2m x 20m 40m2 (M25)