CellarTech South West Ltd
Basement & Cellar Conversion
Basements & Cellars Supplied & Built
Serving Gloucestershire & the South West


 

 

John Newton Products used by CellarTech South West




Newton NP150 (P1)
Pumps - Clean/Ground Water




The Newton NP150 is a medium head and low to medium performance pump. The NP150 is an automatic pump, with integral vertical float switch and so is not suitable for use with our pump control panels. It can be used with Newton Power Converters of 1200W or over to give continual pumping even when the power is out.

The NP150 is supplied with a one way check valve and is suitable for 40mm or 50mm discharge pipe. The pump is sold as pump only, or as a key component in our Newton Titan and Newton Titan-Pro packaged pump systems.
With a 150 Watt motor, the Newton NP150 looks very similar to the NP3, and has the same vertical float switch as the previous pump. The new NP150 will be supplied with the same check valve as we supplied with the NP3, and will connect to the discharge line in the same way. Pump capable of over 100 litres per minute @ 4m head.

3 Year Warranty





Newton NP400 (P2 & P3)
Pumps - Clean/Ground Water




The Newton NP400 is a high head and high to medium performance pump. The NP400 is available as an automatic pump (as shown), or as a manual pump for use with our pump control systems. It is suitable for use with Newton Power Converters of 1200W or over to give continual pumping even when the power is out. The NP400 is supplied with a one way check valve and is suitable for 50mm or 63mm (via an adapter) discharge pipe. For increased duty in a twin pump system, separate discharge lines should be used.

The NP400 is sold as pump only, or as a key component in our Newton Titan-Pro and Newton Titan packaged pump systems and is available as both an automatic self switching pump (our purchase code P2) and manual version for use with our pump control systems (our purchase code P3).
400 Watt motor 2 Models: Newton NP400A (A Automatic Switching via vertical float ) & Newton NP400M (M Manual Switching for use with ancillary Newton Advanced Control Panel). Both versions are supplied with same check valve as previously supplied with NP1Pumps capable of 160 litres per minute @ 4m head.
3 Year Warranty





Newton NP750 (P5 & P6)
Pumps - Clean/Ground Water




The Newton NP750 is a high head and high performance pump. The NP750 is available as an automatic pump, or as a manual pump for use with our pump control systems.

It can be used with Newton Power Converters of 3000W to give continual pumping even when the power is out. The NP750 is supplied with a one way check valve and is suitable for 50mm or 63mm (via an adapter) discharge pipe. For increased duty in a twin pump system, separate discharge lines should be used.
The NP750 is sold as pump only, or as a key component in our Newton Titan-Pro packaged pump system and is available as both an automatic self switching pump (our purchase code P5) and manual version for use with our pump control systems (our purchase code P6).
3 Year Warranty